Call Us
Email Us
C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA
BT-SFP-IG05 transceiver is compliant with SFP MSA, high performance at low cost, which supports operating data-rate up to 1250Mbps.
The transmitter section and receiver section work independently in the transceiver. The receiver section contains an InGaAs Pin photodiode, a transmipedance amplifier and a post amplifier (with working data rate up to 1250 Mbps), functionally transmit received optical power into steady electrical data. The transmitter section contains an 850nm VCSEL laser diode with back-face monitor and a laser driver with APC function, transmitting input electrical data to steady optical output signal.
The product is fully compliant with the SFP MSA such as the LC optical interface receptacle, 3.3V supply voltage, TTL signal detect logic.
| Operating information | ||||
| Model | Input/ Output | Signal
detection |
Power supply | Operating
Temperature |
| BT-SFP-IG05 | AC/AC | TTL | +3.3V | -40℃ to 75℃ |
| Absolute maximum ratings | ||||
| Parameter | symbol | min | max | unit |
| Storage temperature | Ts | -40 | +85 | °C |
| Operating temperature | To | -40 | +75 | °C |
| Power supply | Vcc | -0.5 | +3.7 | V |
| BT-SFP-G05 (850nm VCSEL and PIN, 550m) | ||||||
| Transmit optical, electrical characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Input Differential Impedance | Rin | 100 | Ω | |||
| Transmit Differential Input
Voltage |
VinPP | 300 | 1600 | mV | ||
| Transmit disable input high voltage | 2.0 | V | ||||
| Transmit disable input low voltage | 0.8 | V | ||||
| Transmit fault input high voltage | 2.0 | V | ||||
| Transmit fault input low voltage | 0.8 | V | ||||
| Transmit disable assert time | 0.14 | 5 | us | |||
| Launch optical power | Po | -9.5 | -3 | dBm | ||
| Extinction ratio | ER | 10 | dB | |||
| Central wavelength | l | 850 | nm | |||
| Output spectrum width | Dl | 0.85 | nm | |||
| Receive electrical ,optical characteristics | ||||||
| parameter | symbol | min | tipical | max | unit | note |
| Receiver differential output signal | VoutPP | 400 | 1600 | mV | ||
| Receiver loss of signal Voltage high | 2 | nm | ||||
| Receiver loss of single voltage low | 0.8 | dBm | ||||
| Receiver sensitivity | Sen | -17 | dBm | |||
| Maximum input power | PinMAX | -3 | dBm | – | ||
| Signal detect range | -35 | -18 | dBm | – | ||
| Signal detect hysteresis | 0.5 | dB | – | |||
|
Model |
Specification | ||||||||
| Package | Data
Rate |
Tx | Pout | Rx | Sensiti
vity |
Top | Reach | others | |
| BT-SFP-IG05 | SFP | 1.25G/s | 850
VCSEL |
-9.5~-
3dBm |
850 PIN | <-
17dBm |
-40~75 | 550m | 3.3V,LC |
Reviews
There are no reviews yet.