Born Electronics

+44 7859 571344

Call Us

info@demo.manikmalik.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

24-port Full Gigabit Managed Industrial PoE Switch BI8116PGM8F Series

The BI8116PGM8F is a full gigabit L2+ managed industrial PoE fiber switch. It has 16*10/100/1000Base-T RJ45 ports and 8*100/1000Base-X SFP fiber ports. Port 1-16 can support IEEE 802.3 af/at PoE standard. Single-port PoE power up to 30W. As a PoE power supply device, it can automatically detect and recognize the power-receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, IP cameras, VoIP phones, and industrial sensors through the network cable, and meet the network environment that needs a high-density PoE power supply. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy, and green energy, industrial scenes such as construction setting up a cost-effective and stable communication network.
The BI8116PGM8F has L2+ network management function, supports IPV4/ IPV6 management, static route full line rate forwarding, complete security protection mechanism, complete ACL/ QoS policy, and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/ RSTP/ MSTP (<50ms) and (ITU-T G.8032) ERPS (<20ms) to improve link backup and network reliability. When a one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Category:

Features

Gigabit access , SFP port uplink

  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Supports Ethernet port and SFP port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply

  • PoE network management, realize PoE port on/off , priority setting, port power status viewing, time scheduling, etc.
  • Comply with IEEE 802.3 af/at PoE standard, automatically identify PoE devices for power supply, and not damage non-PoE devices.
  • 16*10/100/1000Base-T RJ45 ports can support PoE power, meeting the demand for high power PoE power supply in various scenarios.
  • The PoE port supports the priority mechanism. When the remaining power is insufficient, the power of the high-priority port is given priority to avoid overloading of the device.

Strong business processing capability

  • Support ERPS ring network and STP/RSTP/MSTP to eliminate layer 2 loops and realize link backup.
  • Support IEEE 802.1Q VLAN, Users can flexibly divide VLAN, Voice VLAN, and QinQ configuration according to their needs.
  • Support static and dynamic aggregation to effectively increase link bandwidth, realize load balancing, link backup, and improve link reliability.
  • Support QoS, port-based, 802.1P-based and DSCP-based three priority modes and four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR.
  • Support ACL to filter data packets by configuring matching rule processing operations and time permissions, and provide flexible security access control policies.
  • Support IGMP Snooping V1/V2/V3 multicast protocol IGMP to meet the multi-terminal high-definition video surveillance and video conference access requirements.

Security

  • Port isolation, storm control.
  • IP+MAC+port+VLAN quadruple flexible combination binding function.
  • 802.1X authentication provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results.

Stable and reliable

  • CCC, CE, FCC, RoHS.
  • The user-friendly panel can show the device status through the LED indicator of PWR, SYS, Link, L/A, PoE.
  • Low power consumption, no fan, aluminum shell, excellent heat dissipation to ensure the stable operation of the switch.

Easy O&M management

  • HTTPS, SSLV3, SSHV1/V2 and other encryption methods are more secure in management.
  • RMON, system log, and port traffic statistics are convenient for network optimization and transformation.
  • LLDP is convenient for the network management system to query and judge the communication status of the link.
  • Various management and maintenance methods such as Web network management, CLI command line (Console, Telnet), SNMP (V1/V2/V3), Telnet, etc.

Specifications

Model BI8116PGM8F
Interface Characteristics
Fixed Port Power-off alarm switch (FAULT)

1*RS232 console port(115200,N,8,1)

8*100/1000Base-X uplink SFP ports (Data)

16*10/100/1000Base-T PoE ports (Data/ Power)

2 set of V+, V- redundant DC power interface (6 Pin Phoenix terminal)
Ethernet Port Port 1-16 support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meters)

100BASE-TX: Cat5 or later UTP(≤100 meters)

1000BASE-T: Cat5e or later UTP(≤100 meters)
Optical Fiber Port Gigabit optical fiber interface, default no include optical modules (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC)
SFP Port Expansion Turbo overclocking 2.5G optical module and ring
Optical Cable/ Distance Multi mode: 850nm/ 0-500m, Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 52Gbps
Forwarding

Rate@64byte

 35.71Mpps
MAC 8K
Buffer Memory 8M
Jumbo Frame 9.6K
LED Indicator Power: PWR (Green), System: SYS (Green), Network: Link (Yellow), Fiber Port : L/A (Green), PoE: PoE (Green)
Reset Switch Yes. press and hold for 10 seconds and then release to restore factory settings
PoE & Power Supply
PoE Port Port 1 to 16
PoE Management Total power limit of PoE power supply

PoE output power allocation, PoE on/off &af/at

PoE working status, Delay start of power supply

PoE output priority configuration, Scheduling of PoE operation and time
Power Supply Pin 1/2 (+) 3/6 (-)
Max Power Per Port 30W, IEEE 802.3 af/at
Power Consumption Standby<15W, Full load af<240W, at<480W
Working Voltage DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse protection
Power Supply No, optional 48V/240W or 48V/480W industrial power supply
Physical Parameter
Operation TEMP / Humidity -40°C~+80°C, 5%~90% RH Non condensing
Storage TEMP / Humidity -40°C~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H) 166*149*89mm
Net /Gross Weight <2.2kg / <2.8kg
Installation Desktop, DIN rail
Certification & Warranty
Lightning Protection Protection level: IP40

Lightning protection: 6KV 8/20us

IEC61000-4-3 (RS):10V/m (80~1000MHz)

FCC Part 15/CISPR22 (EN55022): Class B

IEC61000-6-2 (Common Industrial Standard)

IEC61000-4-9 (Pulsed magnet field):1000A/m

IEC61000-4-10 (Damped oscillation): 30A/m, 1MHz

IEC61000-4-12/18 (Shockwave): CM 2.5kV, DM 1kV

IEC61000-4-4(EFT): Power cable:±4kV, Data cable: ±2kV

IEC61000-4-16 (Common-mode transmission): 30V, 300V, 1s

IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge

IEC61000-4-6 (Radio frequency transmission): 10V(150kHz~80MHz)

IEC61000-4-8 (Power frequency magnetic field):100A/m, 1000A/m,1s to 3s

IEC61000-4-5 (Surge): Power cable: CM±4kV/ DM±2kV, Data cable:±4kV
Mechanical Properties IEC60068-2-6 (Anti vibration)

IEC60068-2-32 (Free fall), IEC60068-2-27 (Anti shock)
Certification CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS
Warranty 5 years, lifelong maintenance.
Network Management Features
Interface Port green Ethernet Energy-saving setting

Broadcast storm control based on port speed

IEEE802.3X (Full-duplex), Port temperature protection setting

The speed limit of the message flow in the access port. The minimum particle size is 64Kbps.
Layer 3 Features L2+ network management ,IPV4/ IPV6 management, L3 soft routing forwarding, Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN Port configuration of Access, Trunk, Hybrid

VLAN based on the protocol, VLAN based on MAC

4K VLAN based on port, IEEE802.1q, Voice VLAN, QinQ configuration
Port Aggregation LACP, Static aggregation, Max 12 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring Network Protocol G.8032 (ERPS), Recovery time less than 20ms

255 Ring at most, Max 1024 devices per ring.
Multicast MLD Snooping v1/v2, Multicast VLAN

IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS 8*Output queues of each port, 802.1p/ DSCP priority mapping

Queue scheduling algorithm (SP, WRR, SP+WRR), Diff-Serv QoS

Flow-based rate limiting, Flow-based packet filtering, Priority Mark/ Remark
ACL Port-based Issuing ACL, ACL based on port and VLAN

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security Port based IEEE802.1X authentication

SSL guarantees data transmission security

Quad binding function of IP+MAC+VLAN+ports

MAC address learning limit, MAC address black hole

Anti DoS attack, Port broadcast message suppression

Hierarchical user management and password protection

SSH 2.0 provides a secure encrypted channel for user login

Host data backup mechanism, ARP intrusion detection function

Port isolation, IP Source Guard, ARP message speed limit function

IP Source Guard function, AAA & RADIUS & TACACS+ certification
DHCP DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
Management Web network management (https)

Link Layer Discovery Protocol(LLDP)

Viewing CPU Instant Utilization Status

NTP clock, One click restore, SNMP V1/V2/V3

NMS platform cluster management (LLDP+SNMP)

Cable status check, Ping detection, System work log

Console/AUX Modem/Telnet/CLI command line configuration

FTP, TFTP, Xmodem, SFTP file upload and download management
System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

Application

Panel diagram

Dimensions

Order Information

Ordering Information Recommended Power Supply
BI8116PGM4F-400WS-at L2+ managed industrial PoE switch with 16*10/100/1000M RJ45 ports and 4*100/1000M SFP ports. Port 1-16 support IEEE 802.3 af/at PoE standard. It support 2AC+DC redundant power terminal input and 1U/19-inch cabinet installation. 2*400W
Note: The optical module is not included by default and needs to be purchased separately.

PACKING LIST

PACKING LIST CONTENT QTY UNIT
20-port Gigabit L2+ managed industrial PoE fiber switch 1 SET
RJ45-DB9 Line 1 PC
AC Power Cable 1 PC
Mounting Kits (Hanging Ears) 1 SET
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “24-port Full Gigabit Managed Industrial PoE Switch BI8116PGM8F Series”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top