Born Electronics

16-port 10G Uplink L3 Managed Industrial PoE Switch BI9108PGM4G4T Series

The BI9108PGM4G4T is a 10G uplink L3 managed industrial PoE fiber switch independently developed by . It has 12*10/100/1000Base-T adaptive RJ45 ports and 4*1/10G SFP+ fiber ports. Port 1-8 can support IEEE 802.3 af/at PoE standard. Single-port POE power up to 30W. As a PoE power supply device, it can automatically detect and recognize power-compliant devices that meet the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, IP camera, VoIP, and industrial sensors through the network cable, and meet the network environment that needs a high-density PoE power supply. It is suitable for intelligent transportation, rail transit, power industry, mining, petroleum, and industrial scenes such as shipping, metallurgy, and green energy construction form a cost-effective, stable, and reliable communication network.

The BI9108PGM4G4T has L3 full network management, supports IPV4/IPV6 management, dynamic routing full line-speed forwarding, complete security protection mechanism, perfect ACL/QoS policy, and rich VLAN functions, easy to manage and maintain. With industry-leading ring network technology. It supports a variety of industrial-grade redundant ring network protocols, and each port can form a ring network, supporting chain ring network, starring network, double starring network, ring network, tangent network ring network, intersecting ring network, coupled ring network, self-healing within 20ms of the ring network. The switches has high reliability, high security, and high manageability, ensures reliable transmission of key data, supports remote management, and cooperates with the -NMS network management platform for cluster management to achieve no blind spot network management throughout the process. The Industrial grade products completely follow the industrial product design and materials. The shell is made of metal material to enhance heat dissipation. It has excellent adaptability to the industrial site environment (including mechanical stability, climate environment adaptability, electromagnetic environment adaptability, etc.). Protection level is IP40, support dual redundant power supply. Low power consumption, heat dissipation technology, MTBF can reach 35 years, 5 years warranty.

Features

Full gigabit port ,10G uplink

  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Support gigabit Ethernet port and 10G SFP+ port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply

  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
  • Comply with IEEE 802.3 af/at PoE standard, automatically identify PoE devices for power supply, and not damage non-PoE devices.
  • The PoE port supports the priority mechanism. When the remaining power is insufficient, the power of the high-priority port is given priority to avoid overloading of the device.
  • 8*10/100/1000Base-T RJ45 ports support PoE power, meeting the PoE power requirements of security monitoring, industrial automation systems, wireless coverage and other scenarios.

Strong business processing capability

  • Support ERPS ring network and STP/RSTP/MSTP to eliminate layer 2 loops and realize link backup.
  • Support IEEE802.1Q VLAN, Users can flexibly divide VLAN, Voice VLAN, and QinQ configuration according to their needs.
  • Support static and dynamic aggregation to effectively increase link bandwidth, realize load balancing, link backup, and improve link reliability.
  • Support QoS, port-based, 802.1P-based and DSCP-based three priority modes and four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR.
  • Support ACL to filter data packets by configuring matching rule processing operations and time permissions, and provide flexible security access control policies.
  • Support IGMP V1/V2/V3 multicast protocol, IGMP Snooping meets multi-terminal high-definition video surveillance and video conference access requirements.

Security

  • Support port isolation.
  • Support port broadcast storm suppression.
  • Support IP+MAC+port+VLAN quadruple flexible combination binding function.
  • Support 802.1X authentication to provide authentication functions for LAN computers, and control the authorization status of controlled ports according to the authentication results.

Stable and reliable

  • CCC, CE, FCC, RoHS.
  • The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.
  • Low power consumption, no fan, aluminum shell, excellent heat dissipation to ensure the stable operation of the switch.

Easy operation and maintenance management

  • Support CPU monitoring, memory monitoring, Ping detection, cable length detection.
  • Support RMON, system log, and port traffic statistics to facilitate network optimization and transformation.
  • Support HTTPS, SSLV3, SSHV1/V2 and other encryption methods, making management more secure.
  • Support LLDP to facilitate the network management system to query and judge the communication status of the link.
  • Support Web network management, CLI command line (Console, Telnet), SNMP (V1/V2/V3) and other diversified management and maintenance.

Specifications

Model

BI9108PGM4G4T

Interface Characteristics
Fixed Port 4*1/10G uplink SFP+ ports (Data) Power off alarm switch port (FAULT)

8*10/100/1000Base-T PoE ports (Data/Power) 4*10/100/1000Base-T uplink RJ45 ports (Data)

2 set of V+, V- redundant DC power ports (6 Pin Phoenix terminal)

Ethernet Port Port 1-12 support 10/100/1000Base-T auto-sensing, full/half duplex

MDI/MDI-X self-adaption

Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meters)

100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e or later UTP(≤100 meters)

Optical Fiber Port 1/10G SFP+ optical fiber port, default no include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical

module. LC)

Optical Fiber Port Turbo overclocking 2.5G optical module expansion and ring network
Expansion
Optical Cable/

Distance

Multi-mode: 850nm / 0~500m, 0~300M(10G),

Single-mode: 1310nm / 0~ 40km, 1550nm / 0~120km.

Chip Parameter
Network

Management Type

L3
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T

IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3ae 10GBase-SR/LR, IEEE802.3x

Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 176Gbps
Forwarding

Rate@64byte

77.38Mpps
CPU 500MHz
DRAM 2G
FLASH 128M
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator System: SYS (Green), Network: Link (Yellow), PoE: PoE (Green), Fiber

port: L/A (Green)

Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore

the factory settings

PoE & Power Supply
PoE Port Port 1 to 8, IEEE 802.3 af/at
PoE Management PoE output power allocation, on/off & af/at, PoE working status Total power limit of PoE power supply, Delay start of power supply

PoE output priority configuration,Scheduling of PoE operation and time

Power Supply Pin 1/2 (+) 3/6 (-)
Max Power Per Port 30W, IEEE 802.3 af/at
Power Consumption Standby<15W, Full load af<120W, at<240W
Working Voltage DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse

protection.

Power Supply No, optional 48V/120W or 48V/240W industrial power supply
Physical Parameter
Operation TEMP /

Humidity

-40~+80°C, 5%~90% RH Non condensing
Storage TEMP /

Humidity

-40~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H) 166*150*75mm
Net /Gross Weight <1.9kg / <2.4kg
Installation Desktop, 35mm DIN rail
Certification & Warranty
Lightning Protection Lightning protection: 6KV 8/20us, Protection level: IP40

IEC61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-3(RS): 10V/m(80~1000MHz)

IEC61000-4-4(EFT): power cable: ±4kV, data cable:±2kV

IEC61000-4-5(Surge): power cable: CM±4kV/DM±2kV, data cable: ±4kV IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) IEC61000-4-8(power frequency magnetic field):100A/m, 1000A/m ,1s to

3s

IEC61000-4-9(pulsed magnet field): 1000A/m IEC61000-4-10(damped oscillation): 30A/m 1MHz IEC61000-4-12/18(shockwave):CM 2.5kV, DM 1kV

IEC61000-4-16(common-mode transmission):30V, 300V,1s FCC Part 15/CISPR22(EN55022): Class B

IEC61000-6-2(Common Industrial Standard)

Mechanical Properties IEC60068-2-6 (anti vibration) IEC60068-2-27 (anti shock)

IEC60068-2-32 (free fall)

Certification CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B,

RoHS

Warranty 5 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)

Port temperature protection setting No connection port automatic sleep

Port green Ethernet Energy-saving setting Broadcast storm control based on port speed SFP+ optical port DDMI real-time digital diagnosis

The speed limit of the message flow in the access port, minimum particle

size is 64Kbps.

Layer 3 Features IPV4 Equal Cost Routing

NG protocol, maximum 1000 entries ARP protocol, maximum 1000 entries

Pingv6, Telnetv6, TFTPv6, DNSv6, ICMPv6

IPV4/IPV6 VRRP, the maximum group is 255

IPV4/IPV6 VLANIF interface supports up to 128

IPV4/IPV6 static route/default route supports up to 128 entries

IPV4 dynamic routing, RIPv1/v2, OSPFv2, BGP4+, 4000 routing entries IPV6 dynamic routing OSPFv3, BGP+, RIPng, IPV6 management, 1000 routing entries

L3 network management function, IPV4/IPV6 dual-stack management L3 routing and forwarding, support communication between different

network segments and different VLAN

VLAN Voice VLAN, QinQ configuration, IEEE802.1q VLAN based on MAC, VLAN based on the protocol

4K VLAN based on port, Port configuration of Access, Trunk, Hybrid.

Port Aggregation LACP, Static aggregation

Max 8 aggregation groups and 8 ports per group.

Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring

Network Protocol

250 Ring at most, Max 250 devices per ring.

G.8032 (ERPS), Recovery time less than 20ms

Multicast IGMP Snooping v1/v2, Max 1024 multicast groups

MLD Snooping v1/v2, Multicast VLAN, Fast log out

Port Mirroring Bidirectional data mirroring based on port
QoS Diff-Serv QoS, Priority Mark/Remark

Queue Scheduling Algorithm (SP, WRR, SP+WRR) Flow-based Rate Limiting, Flow-based Packet Filtering

8*Output queues of each port, 802.1p/DSCP priority mapping

ACL Port-based Issuing ACL, ACL based on port and VLAN

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP

Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.

Security Broadcast storm control, Backup for host datum

SSH 2.0, SSL, Port isolation, ARP message speed limit AAA & RADIUS, MAC learning limit, Mac black holes User hierarchical management and password protection

IP-MAC-VLAN-Port binding, ARP inspection, Anti-DoS attack

IP source protection, IEEE802.1X & MAC address authentication

DHCP DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
Management NMS platform cluster management (LLDP+SNMP) Download & Management on FTP, TFTP, Xmodem, SFTP One-key recovery, Cable Diagnose, LLDP, SNMP V1/V2/V3

NTP, System work log, Ping Test, CPU instant utilization status view

Web Management (HTTPS), Console/AUX Modem/Telnet/SSH2.0 CLI

System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later

TCP/IP, network adapter, and network operating system (such as

Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

Application

Panel diagram

Dimensions

Order Information

PACKING LIST CONTENT QTY UNIT
16-port 10G uplink managed industrial PoE switch 1 SET
RJ45-DB9 Line 1 PC
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “16-port 10G Uplink L3 Managed Industrial PoE Switch BI9108PGM4G4T Series”

Your email address will not be published. Required fields are marked *

Scroll to Top