Born Electronics

+44 7859 571344

Call Us

info@demo.manikmalik.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

16-Port Full Gigabit Managed Industrial PoE Switch BI8108PGM8F Series

BI8108PGM8F is a full Gigabit managed industrial PoE switch. it has 8*10/100/1000M PoE ports and 8*100/1000M SFP fiber slot ports , port 1-8 can supports IEEE 802.3af/at standard POE power supply, single port POE power up to 30W, and the maximum POE output power is 120W (at-240W). As a POE power supply device, it can automatically detect and identify the electrical equipment that meets the standard and supply power through the cable. It can supply the POE terminal equipment, such as wireless AP, network camera, network telephone, industrial sensor and so on, to meet the demand for high density PoE power supply network environment. It is suitable for intelligent transportation, rail transportation, electric power industry, mining, metallurgy and green energy construction and so on. A reliable communication network.

The BI8108PGM8F has the L2+ full network management function, support IPV4/IPV6 management, static route full line rate forwarding, security protection mechanism, ACL/QoS policy and VLAN, and is easy to manage and maintain. Support multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS (<20ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Category:

Features

Gigabit access, SFP fiber port uplink

  • All series support “Gigabit Ethernet port and Gigabit SFP port “combination, which enables users to flexibly build networking to meet the needs of various scenarios.
  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Powerful port lightning protection, ultra-wide voltage input

  • Contact discharge 8KV, air discharge 15KV; port lightning protection common-mode 4KV, differential mode 2KV;
  • Industrial dual power input
  • DC INPUT: 48V-57V, non-PoE DC INPUT: 12-48V.

Intelligent PoE power supply

  • 8*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.

PoE network management and fast Ring function

  • IEEE802.1Q VLAN, flexible VLAN division and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
  • IGMP V1/V2 and IGMP Snooping.
  • ERPS/STP/RSTP/MSTP.
  • Static and dynamic aggregation.

Security

  • 802.1X authentication.
  • Port isolation, Storm control.
  • IP-MAC-VLAN-Port binding.

Stable and reliable

  • Low power consumption, fan-less design, aluminum shell.
  • CCC, CE, FCC, RoHS.
  • The user-friendly panel, it can show the device status through the LED indicator of PWR, SYS, Link, L/A, PoE.

One-stop remote control and management

  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.

Specifications

Model BI8108PGM8F
Interface Characteristics
Fixed Port 8*10/100/1000Base-T PoE ports (Data/Power)
8*100/1000Base-X uplink SFP slot ports (Data)
1 * RS232 console port(115200,N,8,1)
2 set of V+, V- redundant DC power interface (5 Pin Phoenix terminal)
Ethernet Port Port 1-8 support 10/100/1000Base-T,auto-sensing,Full/half duplex
MDI/MDI-X self-adaption
Twisted Pair
Transmission		 10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot Port Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
SFP Port Expansion Turbo overclocking 2.5G optical module and ring
Optical Cable/ Distance Multi-mode: 850nm 0 ~ 550M, single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-TX
IEEE802.3z 1000Base-X, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 256Gbps
Forwarding
Rate@64byte		 23.81Mpps
MAC 8K
Buffer Memory 6M
Jumbo Frame 9.6K
LED Indicator System : SYS (green) , Network: Link (yellow), fiber port: L/A (green),
PoE: PoE (green)
Reset Switch Yes, Press and hold the reset switch for 10s and release it to restore the factory settings
PoE & Power
PoE Port Port 1 to port 8
PoE Management PoE working status
Delay start of power supply
PoE output priority configuration
Scheduling of PoE operation and time
Total power limit of PoE power supply
PoE output power allocation, off& af & at
Power Supply Pin Default: 1/2 (+), 3/6 (-)
Max Power Per Port 30W; IEEE802.3af/at
Total PWR / Input Voltage 120W/240W(48VDC)
Power Consumption Standby<8W, Full load<120W
Standby<10W, Full load<240W
Working Voltage 48-57VDC; 5 Pin industrial Phoenix terminal, support anti-reverse protection.
Power Supply No, optional 48V/120W or 48V/240W industrial power supply
Physical Parameter
Operation TEMP / Humidity -40~+80°C;5%~90% RH Non condensing
Storage TEMP / Humidity -40~+85°C;5%~95% RH Non condensing
Dimension (L*W*H) 165*148*54mm
Net /Gross Weight <1.2kg / <1.5kg
Installation Desktop, DIN rail
Certification & Warranty
Lightning protection / Protection level Lightning protection: 6KV 8/20us; Protection level: IP40
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
Warranty 5 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
The speed limit of the message flow in the access port.
The minimum particle size is 64Kbps.
Layer 3 Features L2+ network management ,IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN 4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid
Port Aggregation LACP, Static aggregation
Max 8 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
Industrial Ring
Network Protocol		 G.8032 (ERPS),Recovery time less than 20ms
250 Ring at most, Max 250 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC,
Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port,
TCP/UDP Port Range, and VLAN, etc.
Security IP-MAC-VLAN-Port binding
ARP inspection, Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes, IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control, Backup for host datum
SSH 2.0,SSL,Port isolation, ARP message speed limit
User hierarchical management and password protection
DHCP DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
Management One-key recovery
Cable Diagnose, LLDP
Web Management (HTTPS)
NTP, System work log, Ping Test
CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
NMS – smart network management system platform(LLDP+SNMP)
System Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

Application

Panel diagram

Dimensions

Order Information

PACKING LIST CONTENT QTY UNIT
16-port 10G uplink managed industrial PoE switch 1 SET
RJ45-DB9 Line 1 PC
User Guide 1

Reviews

There are no reviews yet.

Be the first to review “16-Port Full Gigabit Managed Industrial PoE Switch BI8108PGM8F Series”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top